KLD806 Bean Radar Level Sensor With Flange Installation And Small
Beam Angle
Introduction
Beam Angle
The beam angle is the beam angle at which the energy density of the
radar wave reaches half of its maximum value (3dB width).
Microwaves emit signals out of beam range and can be reflected by
interfering objects.
The larger the antenna size and the smaller the beam angle α, the
less interference echoes will be generated.
For more accurate measurements, avoid installing any internal
devices (such as limit switches, temperature sensors, bases, vacuum
rings, heating coils, baffles, etc.) within the range of the signal
beam.
Feature
- High Frequency 80GHz, More Focus
- One type of PTFE Antenna, no cable, rod, or drop structure.
- Suitable for long/tall/narrow applications
- Not affected by temperature changes, dust or vapors
- Dielectric Constant > 2 is recommended
- Support small batch OEM service
KLD806 
| Medium: solid, storage container, process container, strong dust application Measuring range: 0.3m~10/20/30/60/100m Process connection: flange ≥ DN100 Process temperature: -40～110℃ Process pressure: -0.1～0.3MPa Antenna size: 76mm lens antenna (purge optional) Antenna material: PTFE Accuracy: ±5mm Protection class: IP67 Center frequency: 80GHz Launch angle: 3° Power supply: two-wire /DC24V four-wire /DC12~24V four-wire /AC220V Casing: aluminum/plastic/stainless steel Signal output: two-wire /4...20mA/HART protocol four-wire 4...20mA/ RS485 Modbus |
Dimensions
Installation
1.Flange Installation
When using flange installation, the minimum distance between the
instrument and the tank wall should be 200mm.
① datum plane
② vessel center or axis of symmetry
2.Hoisting Installation
Installation Requirements
When installing the instrument, avoid installing it above the
material inlet, and try to avoid various objects that affect the
signal, such as stirring paddles, etc.
Under extremely complex working conditions, the instrument can work
normally if there is no obstacle in the area with a radius of 20cm
centered on the installation point.
Installation connection diagram:
The maximum installation spool height H max depends on the
installation spool diameter D and the size of the product launch
angle.
Too long installation connection will affect the radar performance.
Dimensions
Casing Dimension
Unit in mm:
Production:
Xi'an Kacise Optronics Tech Co., Ltd considers itself a solution
provider and manufacturer. We offer maximum flexibility and a
cost-optimised offer for our OEM customers.
What we could provide:
The range includes customized shell version/color, thread
type(G-Thread/NPT Thread), Customized Software, prints, manual and
catalog. If you are interested in installing at your side, Radar
Module is available for sure.
