Cost-effective handheld ultrasonic flow meter
Introduction
KUFH2000 ultrasonic flow meter is designed to measure the fluid
velocity of liquid in a full/closed pipe. It is a handheld
measurement system which is both easy to install and use. The
KUFH2000 operates according to the difference in the transit time
of flight measured, and determines the flow velocity by measuring
the travel time of a pulse from one transducer to the next.
Flow in the same direction takes less time to travel to the second
transducer than does flow in the opposite direction.
Electroacoustic transducers receive and emit brief ultrasonic
pulses through the liquid of the pipe. Transducers are vertically
placed at both sides of the measured pipe. Sensors are placed on
the pipe and fastened by means of a clamp. The display will quickly
show the flow velocity. The KUFH2000 can be used for metallic,
plastic and rubber tubes. And it can measure heat if adding
temperature sensor.
Features
- 1% accuracy.
- Non-contact to liquid measurement, so non-conductive, corrosive, explosive
liquid can be measured.
- Wide range for various application fields. (DN15-DN6000)
- Portable handheld host meter with clamp-on sensors measure liquid
flows nearly anywhere.
- No mechanical drive in ultasonic flowmeter, parts are rarely
damaged. Maintenance free and long operating life.
- Easy and quick installation. Save time with no pipe cutting or process shutdown.
- No obstruction measurement, no pressure loss.
Specifications
| Items | Performance and Parameter |
| Main Unit | Principle | transit-time ultrasonic flow meter |
| Accuracy | Accuracy : 1% |
| Display | 4 x 8 or 4 x 16 Character matrix backlight LCD, support languages
of English, Chinese, Italian and French. |
| Signal output | 1 channel pulse output OCT (pulse width is adjustable between
6~1000ms, 200ms(default). |
| Data interface | Insulate RS232 / RS485 serial interface, upgrade the flow meter
software by computer, support the MODBUS, etc. |
| Pipe condition | Pipe material | Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC,
Aluminum, Glass steel product, liner is allowed. |
| Pipe diameter | DN15~6000mm |
| Straight pipe length | Sensor installation should be satisfied: upstream10D, downstream
5D, 30D from the pump. |
| Medium | Type of liquid | Water, sea water, waste water, liquid alcohol, beer, gas, oil, etc |
| Temperature | -30~160℃ |
| Turbidity | 10000pm not so much baubles |
| Flow rate | 0~±10m/s |
| Environment | Temperature | Main unit: -20--60℃
Flow sensor: -30--160℃ |
| Humidity | Main unit: 85%RH; Sensor is IP67 |
| Power supply | 3 built-in 1.2V capacity rechargeable Ni-MH battery 2000mAH,full of
electricity sustainable work more than 12 hours, power adapter:
AC90 ~260V, which can realize continuous measurement |
| consumption | 1.5W |
| shell material | Inflaming retarding ABS |
Description of parts
Sensor Selection
Ordering Information
Production Flow
Packaging & Shipping
Applications
Certifications
Company Information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof, etc. which assure our products are conform to the
international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
Our Services
- Your inquiry will be replied in 24hours.
- Well-trained and experienced staffs to answer all your enquires in
fluent English.
- OEM&ODM, we can help you to design and your request will be put
into product.
- Distributorship are offered for your unique design and some our
current models.
- Protection of your sales area, ideas of design and all your private
information.
- Discounts are offered based on order quantities.
- We provide paid repair services for meter damages not arising from
manufacturing quality issues or meter damages not within the scope
of warranty.
FAQ
1. Q: What information need to be provided to choose the suitable model?
A: Please provide us: application field, pipe size, pipe material, medium( liquid type),
temperature, installation method, so we can choose model and quote for you quickly.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and
flow measuring instruments.
OEM & ODM service are available. Welcome to visit us.
3. Q: What is your MOQ for the handheld ultrasonic flow meter?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date?
A: The delivery date is about 3-15 working days after receipt of
payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal and Trade Assurance.
For mass production order, it is 30% deposit in advance and 70%
balance before shipment.
6. Q: What is Trade Assurance payment method:
A: It’s a free service which can protect your orders from payment
to delivery.
And we now have USD104,000.00 of caution money to assure your
orders.
7. Q: Do you have a warranty for the handheld ultrasonic flow
meter?
A: Yes, we have the warranty of 12 months.
