Product Description
Solving Shock and Vibration Problems
Shock and vibration rank among the most destructive agents in
industrial environments. These disturbances erode the life of
mechanical and electronic equipment – driving machinery from
service long before necessary. Sometimes this premature
deterioration stems from repeated overstress loadings, sometimes
from fatigue failures of vital parts, and sometimes from a
combination of both.
Kacise offers a variety of wire rope isolators that resolve shock
and vibration issues in virtually any application. By selecting
wire rope with the proper characteristics – wire diameter, number
of strands, cable length, cable twist or lay, and the number of
cables per section, we have created wire rope isolators that
provide superior equipment protection. Ideally, passive isolation
systems require no maintenance, use little space, and keep
functioning under varying temperatures and in corrosive
environments.
Product Size Chart
| Product number | High(mm) | Width(mm) | Product weight(kg) | Installation method | Hole size(mm) | Thread size(mm) | Counterbore taper |
| JGX-286-8-X-16860-A-S | 133 | ± 6.35 | 140 | 8.4 | C, D | Ø13.5 + 0.13- 0.38 | M12X1.75 | 90° |
Press Fit Test Data Sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-286-8-X-16860-A-S | 12280 | 50.8 | 2362 | 1010 |
45° Inclined Press Fitting Load Test Data Sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-286-8-X-16860-A-S | 8720 | 72.4 | 1348 | 503 |
Shear Rolling Load Test Data Sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-286-8-X-16860-A-S | 6140 | 53.3 | 618 | 618 |
Wire rope vibration isolators have the following advantages:
- Rugged, metal construction
- Low frequency, highly damped vibration isolation
- Excellent shock attenuation
- Wide temperature range, -200°F to +650°F
- Fail-safe construction
- Maintenance-free
Product structure diagram
Guide for installation of wire rope isolator
1. Before installation, please carefully check whether the mounting
hole matches the mounting hole of the vibration isolator, such as
whether the thread is the same, etc.
2, the installation hole is clean, there is no burr, rust, damage
and other defects.
3. Since the vibration isolator is an elastic component, it needs a
little movable space when working. Before installation, please
carefully check whether there is any equipment affecting
installation in the installation part and whether the movable space
of the vibration isolator is enough. Please check whether the
vibration isolator is in good condition and has no defects before
installation.
4. Prepare a suitable screwdriver and crowbar.
5, first install the isolator to heavy equipment or fixed
equipment, installation screws do not need to tighten, so that the
isolator can be slightly active.
6. Install the connecting device on the other side of the vibration
isolator. If the mounting hole is slightly misaligned, you can move
the vibration isolator or use a crowbar to align the mounting hole
of the vibration isolator with the mounting hole of the equipment,
and then screw the fixing screw.
7. After fixing the device position, tighten all the fixing screws.
Application
