KUS630 Series Ultrasonic Level Meter

1.Features

• KUS630 DTU conforms to the environmental data transmission protocol;
• Low-power RS485 design: 10000mA 5V battery, which can theoretically be used for more than 3 years;
• Using waterproof and anti-corrosion materials, the protection level reaches IP68, especially suitable for water level monitoring applications in rivers and wells;
• The intelligent data terminal can be powered on to enter the working state, and can control the data transmission state.

2.Introduction

The anti-corrosion ultrasonic level gauge is a digital level gauge controlled by a microprocessor. In the measurement, the pulsed ultrasonic wave is sent by the sensor (transducer), the sound wave is reflected by the surface of the object and received by the same sensor, converted into an electrical signal, and the distance between the sensor and the measured object is calculated by the time between the emission and reception of the sound wave. . Because the anti-corrosion ultrasonic liquid level gauge adopts non-contact measurement, the measured medium is almost unlimited, and it can be widely used in the measurement of the height of various liquid and solid materials.

3. Dimensions
Unit in the diagram is mm

4.Electrical connections and signal definitions

5.Parameter description

working conditions

Other instructions

6.More information
The ultrasonic object/liquid level meter is installed on the upper part of the container. Under the functional control of the combination unit and electronic components, the probe emits a beam of ultrasonic pulses above 20000Hz to the measured object. Since temperature has an effect on the speed of sound, the meter should measure the temperature to correct for the speed of sound. There are many options for the four-wire system, which can simultaneously bring 4-20mA, RS485 communication, two relay outputs, and can also be powered by 220VAC.

7. Ordering Information

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.