IP67 Ultrasonic Transducer Sensor
1.Dimensions
Unit in the diagram is mm.
600 series transmitter dimensions
2.Electronic interface and signals definition
| Cable color | Pin | Description | Note |
| Red | 1 | Power supply | |
| Black | 2 | GND | |
| Yellow | 3 | Analogue output | The 600B will work in mode 1 or 0 cannot work in power save mode,
if the 4-20mA, 0-3.3V 0-5V analogue output used. |
| Blue | 4 | RS485A+ | TTL-TXD for ttl output signal |
| Green | 5 | RS485B- | TTL-RXD for ttl output signal |
3.technical parameters
General specifications
Model:600
|
| Sensing range | 0.6m-5m Low-power products also support wide voltage input, this
range is 3.3V power supply range (customers can customize 6m range
products) |
| Adjustment range | 0.3….3m |
| Unusable area | 0 ...0.3m |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx.220 kHz |
| Response delay | approx. 10 ms |
| Output signal | 0-10V. 0-3V 0-5V /4-20mA/NPN/PNP/RS485 Analog output. |
Electrical specifications
| No-load supply current I0 | ≤ 20 mA active period ≤0.3mA during sleep time |
| Electrical connection | 5-core cable (analog output), 6-core cable (switch output)； |
| Ranging resolution | 1mm； |
| Measurement accuracy | ≤1 %F.S. |
Working conditions
| Working temperature | -40…85℃(233...358K) |
| Storage temperature | -40…85℃(233...358K) |
| Temperature compensation | Yes |
| Protection class | IP67 |
| Supply voltage | 3.3 ... 24 VDC, ripple 10 %SS |
4.Installation conditions
If the sensor is installed at the environment temperature fall
below 0℃,It should do well on the protective measures. In case of
direct mounting of the sensor in a through hole using the steel
nuts, it has to be fixed at the middle of the housing thread.
5.Company information
Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in
Xi'an, Shaanxi Province, China, is a professional engaged in
instrumentation and sensors, R & D, production, sales as one of
professional high-tech enterprises, we have our own production
workshop and central laboratory. Factory building area is about
3000 square meters, with production of more than 30 employees, 8
engineer, 6 inspectors, 10 saleman, 5 for customer service, is this
industry, we are one of the strong technology manufacturers with
varieties specification.
When the company set up, we began to focus on the coordination of
military supplies production, achieved GB/T19001-2008/ISQ9001:2008,
GJB 9001B-2009 certification. When our company is running mature
and stable, in 2008, we began to develop our business. Based on the
production of military products quality control, we developed a lot
of sensor products, such as a pressure sensor / transducer /
sensor, level transmitter / ultrasonic level meter / ultrasonic
flow meter, inertial navigation products, IMU, gyroscope,
accelerometer etc.
