"Specs at a glance
Max. measurement error
Mass flow (liquid): ±0.5 % (standard), ±0.15 % (option)
Mass flow (gas): ±0.75%

Measuring range
0 to 180 000 kg/h (0 to 6615 lb/min)

Medium temperature range
–40 to +150 °C (–40 to +302 °F)

Max. process pressure
PN 40, Class 300, 40K

Wetted materials
Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)" "Field of application
Promass K is the cost-efficient Coriolis solution for elementary mass flow measuring tasks. It provides dependable measurement in basic applications featuring air, gas, fuel and water. With its straightforward hard- and software design, Promass K 10 simplifies every step in its life cycle from engineering to servicing at usual Endress+Hauser quality. Heartbeat Technology enables measurement reliability and extension of recalibration cycles.

Measuring principle operates independently of physical fluid properties such as viscosity or density

Measurement of liquids and gases in utility processes and basic applications

Device properties

Compact dual-tube sensor

Medium temperature up to +150 °C (+302 °F)

Process pressure up to 100 bar (1450 psi)

System integration with HART, IO-Link, Modbus RS485

Flexible operation with app and optional display" "Benefits
Easy integration into your plant infrastructure with IO-link

Cost effective device for basic process and hygienic applications (3-A and cGMP, EHEDG)

Fewer process measuring points – multivariable measurement (flow, density, temperature)

Space-saving installation – no in-/outlet run needs

Optimum usability – display with touch screen (HART and MODBUS RS485 communication only) or operation with mobile devices and SmartBlue app

Simple, time-saving commissioning – guided parameterization in advance and in the field

Integrated verification – Heartbeat Technology" "Measuring principle
Coriolis

Product headline
Flowmeter with minimized total cost of ownership with easy-to-use operation concept.
Measurement of liquids and gases in utility processes and basic applications.

Sensor features
Cost-effective general-purpose device – alternative to mechanical flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). Process pressure up to 100 bar (1450 psi).

Transmitter features
Optimum usability – display with touch screen (HART and Modbus RS485 communication only) or operation with mobile devices and SmartBlue app. Simple, time-saving commissioning – guided parameterization in advance and in the field. Integrated verification – Heartbeat Technology.
System integration with HART, Modbus RS485, IO-Link. Flexible operation with app and optional display.

Nominal diameter range
DN 8 to 80 (⅜ to 3"")

Wetted materials
Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)

Measured variables
Mass flow, temperature, Density (option), volume flow, corrected volume flow

Max. measurement error
Mass flow (liquid): ±0.5 % (standard), ±0.15 % (option)
Mass flow (gas): ±0.75%

Measuring range
0 to 180 000 kg/h (0 to 6615 lb/min)

Max. process pressure
PN 40, Class 300, 40K

Medium temperature range
–40 to +150 °C (–40 to +302 °F)

Ambient temperature range
Standard: –20 to +60 °C (–4 to +140 °F)

Sensor housing material
Stainless steel 1.4301 (304)

Transmitter housing material
AlSi10Mg, coated

Degree of protection
Standard: IP66/67, Type 4X enclosure

Display/Operation
2.4"" LCD display with touch & auto rotate; Configuration and operation via Bluetooth technology possible

Outputs
4-20 mA HART (active/passive), Pulse/frequency/switch output
Modbus RS485, 4-20 mA

Digital communication
HART, MODBUS RS485, IO-Link

Power supply
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

Hazardous area approvals
ATEX
IECEx
cCSAus
EAC
NEPSI
INMETRO
IND Ex
JPN
UK Ex
KC

Metrological approvals and certificates
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)

Pressure approvals and certificates
CRN, PED

Material certificates
3.1 material

Hygienic approvals and certificates
EC 1935, FDA, GB4806, cGMP, 3-A"

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.