Max. measurement error
Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
Measuring range
9 dm³/min to 282 m³/h (2.5 gal/min to 1250 gal/min)
Medium temperature range
Liner material polyamide: 0 to +60°C (+32 to +140°F)
Max. process pressure
PN 16, Class 150, 10K
Wetted materials
Liner material polyamide: 0 to +60°C (+32 to +140°F)
Electrodes: 1.4435 (316L)" "Field of application
The wafer flowmeter Promag D is designed for all basic water
applications where space is at a minimum. With its straightforward
hard- and software design, Promag D 10 simplifies every step in its
life cycle from engineering to servicing at usual Endress+Hauser
quality. Heartbeat Technology enables measurement reliability and
compliant verification.
The bidirectional measuring principle is virtually independent of
pressure, density, temperature and viscosity.
For basic water applications; optimized for limited space and
plastic pipe installations
Device properties
Short installation length and low weight
Integrated ground disks made of stainless steel
International drinking water approvals
System integration with HART, Modbus RS485
Flexible operation with app and optional display" "Benefits
Easy, fast centering of the sensor – innovative housing
construction
Energy-saving flow measurement – no pressure loss due to cross
section constriction
Maintenance-free – no moving parts
Optimum usability – operation with mobile devices and SmartBlue app
or display with touch screen
Simple, time-saving commissioning – guided parameterization in
advance and in the field
Integrated verification – Heartbeat Technology" "Measuring
principle
Electromagnetic
Product headline
Highly cost-effective wafer flowmeter with easy-to-use operation
concept.
For basic water applications, optimized for limited space and
plastic pipe installations.
Sensor features
Easy, fast centering of the sensor – innovative housing
construction. Energy‐saving flow measurement – no pressure loss due
to cross section constriction. Maintenance‐free – no moving parts.
Short face-to-face length and low weight. Integrated ground disks
made of stainless steel. International drinking water approvals.
Transmitter features
Optimum usability – display with touch screen (HART and Modbus
RS485 communication only) or operation with mobile devices and
SmartBlue app. Simple, time-saving commissioning – guided
parameterization in advance and in the field. Integrated
verification – Heartbeat Technology.
2-line display with push buttons. Device as compact or remote
version. HART.
Nominal diameter range
DN 25 to 100 (1 to 4)
Wetted materials
Liner material polyamide: 0 to +60°C (+32 to +140°F)
Electrodes: 1.4435 (316L)
Measured variables
Volume flow, mass flow
Max. measurement error
Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
Measuring range
9 dm³/min to 282 m³/h (2.5 gal/min to 1250 gal/min)
Max. process pressure
PN 16, Class 150, 10K
Medium temperature range
Liner material polyamide: 0 to +60°C (+32 to +140°F)
Ambient temperature range
-40 to 60°C (-40 to 140°F)
Sensor housing material
DN 25 to 100 (1 to 12): AlSi10Mg, coated
Transmitter housing material
Polycarbonat; AlSi10Mg, coated
Degree of protection
Compact version: IP66/67, type 4X enclosure
Sensor remote version (standard): IP66/67, type 4X enclosure
Display/Operation
LCD display with touch & auto rotate
Outputs
4-20 mA HART (active/passive), Pulse/frequency/switch output
Modbus RS485, 4-20 mA
Digital communication
HART, MODBUS RS485
Power supply
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
Hazardous area approvals
CSA, GP
Product safety
Product safety
Metrological approvals and certificates
Calibration performed on accredited calibration facilities (acc. to
ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement
traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV
SÜD attestation)
Hygienic approvals and certificates
Hygienic approvals and certificates"
