Introduction
The KWL801B radar water level meter is a reliable and efficient
solution for water level monitoring in sewage treatment plants.
With a 3 m RS485 output, it offers precise and continuous
measurement capabilities. This meter operates by emitting radar
waves that interact with the water surface in the sewage treatment
plant. The radar waves bounce back and are detected, allowing the
meter to calculate the water level accurately. The 3 m range is
well-suited for the confined spaces and specific requirements of
sewage treatment facilities. The RS485 output enables seamless
integration with the plant's existing control and monitoring
systems. It provides real-time water level data that is crucial for
maintaining proper sewage flow, preventing overflows, and ensuring
the effectiveness of the treatment process. By using this meter,
operators can optimize the operation of pumps, valves, and other
equipment, leading to enhanced overall performance and compliance
with environmental regulations.
Feature
- Based on the self-developed CMOS millimeter-wave RF chip
- More compact RF architecture
- Higher signal-to-noise ratio
- Smaller dead zone
- 5GHz working bandwidth
- Higher measurement resolution and measurement accuracy
- Less influence by the interference in the installation environment
- More convenient of installation and
- Modern design of integrated flat antenna
Technical Specifications
| Model | KWL801B-RS485 | KWL801B-RJ45 | KWL801B-RS232 | KWL801B-TTL |
| Frequency of measurement | 80GHz |
| Communication | RS485 |
| Frequency of acquisition | ≥200ms/ configurable |
| Current of operation | 12V/14mA |
| Distance measurement accuracy | ±2mm |
| Communication protocol | Modbus/ Text protocol |
| Antenna beam width | ±2.75° |
| Supply voltage | 9~24V |
| Range of measurement | 0.2~40m
0.18~30m
0.1~15/20m
0.06~3/5/10m |
| RF pulse current | 100mA/20ms |
| Working humidity | 0~95% |
| Type of thread | G thread/ customized |
| Working temperature | -40~75℃ |
| Grade of water resistance | IP68 |
| Net weight | 0.6kgs |
Wiring Instructions
4.1 [RS485 version] Wiring instructions
| Red line | VCC (9~24V power supply) |
| Black line | GND |
| Yellow line | 485-A |
| Green line | 485-B |
4.2 [RJ45 network port version] Wiring instructions
4.3 [RS232 version] Wiring instructions
| Red line | 12 (6~28V power supply) |
| Black line | GND |
| Yellow line | TX |
| Green line | RX |
4.4 [TTL version] Wiring instructions| Red line | VCC |
| Black line | GND |
| Yellow line | TX |
| Green line | RX |
Dimension
Apply
Company Information
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE,
intrinsic safety explosion-proof and isolated safety
explosion-proof, etc. which assure our products are conform to the
international standards.
We have been specializing in manufacturing pressure, level and flow
measuring instruments and related products for 10 years. We have
experienced technical and management personnel, through the efforts
of our entire staff, we have become a professional measuring
instrument manufacturer and solution provider. And we are
continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain,
Australia, Chile and 20 other countries and regions, and received
many favorable feedbacks. Our overseas distributers are also
increasing. We regards “reasonable prices, efficient production
time and good after-sales service” as our tenet, and hope to
cooperate with more customers for mutual development.
