KTG152 Dew Point Meter (Portable) for Dry Industrial Environments
Introduction
The KTG152 dew point meter adopts an imported polymer - material
capacitive - resistive dew point sensor. It can measure the trace
water content in various non - corrosive gases and is suitable for
various occasions with strict requirements for water content
control.
Application Areas
Petrochemical industry, natural gas, industrial gases,
semiconductor industry, drying industry, food industry, power
industry, machinery manufacturing, air separation industry,
pharmaceutical industry, etc.
Instrument Features
- It is equipped with an advanced and fast - acting drying protection
device, featuring rapid response and high sensitivity.
- It supports both AC and DC power supply, and its portable design
makes it easy to use and operate.
- It has an integrated design, with a small size, light weight,
simple structure, and reasonable layout.
- It is equipped with a 128×64 dot - matrix true - color LCD display,
which can simultaneously display parameters such as dew point,
date, and time.
- It has a regular automatic storage function, allowing users to view
the stored data at any time.
- It can perform mutual conversion among dew point (℃), ppmV, and
absolute humidity.
- It has quick - access buttons and remote - control operation, which
facilitates customers to browse various function parameters.
- The alarm point can be arbitrarily set within the full measurement
range.
- It is equipped with a high - power battery, which ensures that the
instrument can continuously operate for more than 20 hours with a
single charge.
Technical Parameters
Measurement range: - 100.0 - 0℃ or - 80.0 - + 20.0℃ (the range can
be selected when ordering).
Accuracy: ±1.5℃ (above - 60℃); ±2℃ (below - 60℃).
Repeatability: ±1.0℃.
Resolution: 0.1℃.
Pre - heating time: ≤5 min.
Sample gas flow rate: (1.5 - 3.0) L/min.
Sample gas pressure: 0.05 MPa ≤ inlet pressure ≤ 0.25 MPa.
Response time: T90 - ≤ 5 minutes.
Charging power supply: 1: (220 ± 22) VAC, (50 ± 5) Hz, and the
charger has a built - in charging protection function.
Working power supply: 2: The rechargeable battery built into the
instrument.
Working environment: Temperature: - 15℃ - + 45℃; Humidity: ≤90% RH.
Weight: Approximately 1.9 kg.
